Oukaning 48V 5 HP 1200W Electric Outboard Motor Fishing Boat Trolling Engine Short Shaft

???Product description??? With a huge thrust, a super strong shaft, and precise speed control, the outboard engine is a good helper for your water work. Its brushless pure copper motor and flexible steering let you sneak up on fish, outdoor adventure, etc. with the best speed and low noise.This electric outboard motor is suitable for small ships with different materials within 16.4 feet in length, such as inflatable boats, iron boats, plastic boats, fiberglass boats, and wooden boats. It is widely used in fishery, aquaculture, outdoor exploration, etc. ???Specification??? Model: DD-48V-1200W Power: 1200W/5HP Rated Voltage: 48V Rated Current: 18A Rated Speed: 3000rpm No-load Speed: 4000 rpm Process: Spray Painting Gear Ratio: 2.08(27:13) Control System: Tiller Control Max. Speed: 15km/h/9.3mph Motor Type: Pure Copper Brushless Motor Reverse Gear: Yes Max. Load-bearing Capacity: 500kg/1102lbs Recommended Battery: 1*48V/4*12V (Not Included ) Propeller Model(in): 7-1/4×5-A(The size of the propeller is 7.25 inches/18.4cm, and the propelling distance of the propeller is 5 inches/12.7cm after one revolution) Length of Suitable Ships: Less than 5m/16.4ft Package Size: 95*42*29cm/37.4*16.53*11.41in Product Size: 92*36.5*22cm/36.22*14.37*8.66in Gross Weight: 14kg/30.86lbs Net Weight: 12kg/26.45lbs Tail Plate Height: 42cm/16.53in(Short Shaft) Stern Plate Adapter Height: 40cm/15.74in ???Maintenance??? 1.Complete machine maintenance(The following time and date intervals are in no order.) 1.1 Daily inspection: whether screws and nuts are loose. 1.2 Clean the dust on the surface of the whole machine every 8 hours. 1.3 Check the connection of high-voltage line every 100 hours. 2. Keep the product clean 2.1 Clean the dirt on the motor controller regularly. It is forbidden to spray with water, and clean it with a brush and high-pressure air. 2.2 Before starting each time, combustible materials around the controller must be cleaned to avoid fire. 2.3 Clean the sundries in the cooling system to avoid blocking the air duct. The cooling fan should be cleaned regularly to avoid overheating and mechanical damage. ???Common Faults and Troubleshooting??? 1. If the starting handle is found to be powered off during operation, please check whether the positive and negative poles of the battery and the whole set of power cables are connected properly. 2. Always check whether the controller screws are loose. 3. The gearbox should be replaced with gear oil for three months ???Package Included??? 1* Electric Outboard Motor 1* Propeller 1*English User Manual 2*Keys All Accessories Needed for Installation